Package Contents; Installing The Tuner Box - Philips 32PF1700T/96 Installation And Operation Manual

32PF1700T_96_DTV-EN.book Page 1 Thursday, April 26, 2007 5:05 PM

Package contents

Check the packaging for the following items. If any of these items is missing
or damaged, please contact your dealer immediately:
Digital video tuner box (x1)
• This tuner box is designed specifically for the 32PF1700T/96 LCD display. Do
not modify this tuner box or use it for other purposes.
• You need to purchase a suitable aerial antenna and connect it to this tuner box.
For best results, it is recommended that you use a high quality antenna with
built-in signal amplifier.

Installing the tuner box

Before installing the tuner box, please pay attention to the following to
ensure the safety of installation:
• Wear suitable protective insulation gloves to prevent any possibilities of
injuries.
• Peel off the protective film on the tuner box prior to installation.
• Be sure to turn the display power off and disconnect the power cord from the
power outlet. Turn the power of the devices off and remove all connected
signal cables if the display is connected to other devices.
• Make sure that there is sufficient space around the display for performing the
installation. If not, it is suggested that you move the display to a suitable
place to perform installation, and then move it back to its original location
when installation is completed.
1. Turn the display to reveal its left side and
locate the tuner box slot (as shown in the
illustration on the right).
Installation and Operation
Guide (x1)
Tuner box slot
Screw (x1)
Package contents 1