Panasonic WV-SW395APJ Operating Instructions Manual page 17

Snap shot button
Click this button to take a picture (a still picture). The picture will be displayed on a newly opened window.
When right-clicking on the displayed image, the pop-up menu will be displayed. It is possible to save the
image on the PC by selecting "Save" from the displayed pop-up menu.
When "Print" is selected, printer output is enabled.
Note
•
The following setting may be necessary when using Windows 7 or Windows Vista.
Click "Internet Options" on the Tools menu of Internet Explorer, and then click the [Security] tab.
Select "Trusted Sites", and click "Sites". Register the camera address on the "Website" in the
"Trusted Sites" window.
Mic input button
*5
Turns on/off the audio reception (hear audio from the camera on a PC). This button will be displayed only
when "Mic input", "Interactive(Full-duplex)" or "Interactive(Half-duplex)" is selected for "Audio transmission/
reception" on the setup menu. (®page 129)
When this button is clicked, the button will turn into the
heard.
Audio volume can be adjusted (Low/ Middle/ High) by moving the volume cursor
Audio output button
*5
Turns on/off the audio transmission (play audio from the PC on the unit speaker). This button will be
displayed only when "Audio output", "Interactive(Full-duplex)" or "Interactive(Half-duplex)" is selected for
"Audio transmission/reception" on the setup menu. (®page 129)
The button will blink during the audio transmission.
When this button is clicked, the button will turn into the
Audio output volume can be adjusted (Low/Middle/High) by moving the volume cursor
Note
•
When a user is using the audio transmission function with "Interactive(Half-duplex)" selected, the
receiver button and the transmission button will be inoperable for the other users. When
"Interactive(Full-duplex)" is selected, the transmission button is inoperable for other users.
•
Possible duration of audio transmission is up to 5 minutes per transmission. When 5 minutes have
passed, the audio transmission will automatically stop. To turn the audio transmission function on,
click the [Audio output] button again.
•
When the camera is restarted, the adjusted volume level (for both the audio transmission and
reception) will return to the level that had been set on the [Audio] tab on the setup menu.
(®page 129)
•
Actual volume level will change in three steps even though the volume cursor can be adjusted
minutely.
SD recording status indicator
ST165 ST165 ST162 ST162
The status of the SD recording can be checked with this indicator.
When the SD recording starts, the SD recording status indicator will light red. It will go off when the SD
recording stops.
This indicator will be displayed when "Manual" or "Schedule" is selected for "Save trigger" on the setup
menu. (®page 58)
Main area
*4
Images from the camera will be displayed in this area.
The current time and date will be displayed according to the settings configured for "Time display format"
and "Date/time display format". (®page 54)
In addition, when being adjusted, the status of brightness (®page 55), panning/tilting degree and the
zoom ratio display (®page 96), camera position (®page 96), and the preset ID (®page 115) will be
SW396 SW396 SW395 SW395 SC386 SC386
1 Monitor images on a PC
button and audio from the camera will not be
button and audio from the PC will not be heard.
SC385 SC385 SC384 SC384
Operating Instructions
.
.
SW175 SW175 SW172 SW172
17