Panasonic WV-SW395APJ Operating Instructions Manual page 226

21 Using the CD-ROM
•
When the [Access Camera] button is clicked, live images of the selected camera will be displayed.
•
It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addresses in
accordance with the protocol in use.
•
The information displayed can be sorted by clicking the title of each displayed item.
3.
Complete each network setup item and click the [Save] button.
SW396 SW396 SW395 SW395
Note
•
By unchecking the "Wait for camera restarting." checkbox, multiple cameras can be continuously
configured.
IMPORTANT
•
It may take for around 2 minutes to complete to upload the settings to the camera after clicking the
[Save] button. The settings may be invalidated when the LAN cable is disconnected before
completing the upload. In this case, perform the settings again.
•
When using a firewall (including software), allow access to all UDP ports.
226 Operating Instructions
SC386 SC386 SC385 SC385 SC384 SC384
SW175 SW175 SW174W SW174W SW172 SW172 ST165 ST165 ST162 ST162