LG Ipsolute LW130W-D Owner's Manual page 40

Initial Configuration and Operation
> Maximum Frame Rate: Select the max frame rate of the
video.
> GOP size: You may alter the GOP value settings here. This
attribute is activated only when the video codec is set to
H. 264. GOP means the groups of the images, and with
higher GOP value the network transmission rate gets
better.
> Quality: Select the image quality level of the video.
- VBR: The network transmission rate can be varied in
accordance with the complexity of the imagery, in
order to maintain the quality of the video image.
- CBR: The network transmission rate is maintain,
while the video quality gets varied for this reason.
> Stream Quality: when the [Quality] item is set to VBR,
this item will show up. Select the network stream quality
between Highest, High, Medium, Low, Lowest
> Bit Rate: When CBR mode in the quality setting is
activated, this item will show up. Select your Bit
Transmission Rate here. (From 256 to 6,144 kbps)
40
Note:
If the bit rate is set too low, the configured FPS many not
be satisfied in some cases according to the data volume
of the transmission stream. The default settings of the
stream are, respectively, max. frame rate 15, GOP 30, CBR
quality, and bit rate 2048.
• Save: Click on this button to save the changes you made.
Audio
Audio In
> Enable: Activate this check box to use the Audio Input.
Note:
Even if this setting is altered, the users who are already
connected are not affected by the changed value.