LG Ipsolute LW130W-D Owner's Manual page 56

Initial Configuration and Operation
General
> Sensitivity: Set the sensitivity of the motion detector to
detect any moving objects in the scene. High higher
sensitivity, even tiny twitches in the scene can be
detected as a moving object.
> Save: Click this button to save the changes you made.
Setting the motion detector frame
1. Click [Add] button to any a motion detector frame on
screen. As you click the button, newly added motion
detector frame will appear on the preview screen, and
you may add upto five frames per scene.
2. Set the sensitivity value for the frame at Sensitivity menu.
3. Click on the motion detector frame at its rim or sides and
drag to a desired position.
4. Click [Save] to save the changes.
56
Notes:
• The size of the motion detector frame can be adjusted.
Click on the edge of the frame and drag to adjust the size
as necessary.
• To activate the motion detection functionality, either of the
Master or Slave setting should be activated by activating
the [Enable] Item. Also the video codec should be set at
H.264 and the value of GOP should be 2 or higher to allow
the motion detection mode to function.
Trigger Event
When there is an event (a motion detected by the motion
detector) the video feed is either recorded or the relay and
Flash LED, alarming device will be activated.