Table of Contents
Advertisement
Preparing the machine for use
If the rinse aid lamp on the control panel lights, fill the rinse aid compartment with
rinse aid. To add rinse aid, remove the rinse aid compartment cap by turning it.
1 Fill the rinse aid compartment with rinse aid until the rinse aid level indicator
becomes dark; 2 refit the cap and close it by turning so that the arrows line
up. By checking the rinse aid level indicator on the detergent dispenser, you can
determine whether or not the machine needs rinse aid. A dark indicator b means
that there is rinse aid in the compartment, while a light indicator a indicates
that the rinse aid compartment requires filling with rinse aid. The rinse aid level
adjuster can be set to a position between 1 and 6. Factory setting for rinse aid is
the position 3. If water stains form on your dishes after a wash, increase the value
of the setting, whereas if a blue stain is left when wiped by hand, decrease the
setting. 3
Warning:
for use in the machine. As any rinse aid residues left as a result
of overflow when filling the compartment will create extremely high
amounts of foam and reduce the washing performance, wipe up any
excess rinse aid with a cloth.
.
Use only those rinse aid materials which are allowed
18
Advertisement
Table of Contents
