Table of Contents
Advertisement
Troubleshooting
Error codes & what to do
ERROR
CODE
ERROR DESCRIPTION
There is a water overflow
F1
The waste water in the
machine
discharged.
F2
Error of continuous water
input
F3
Inadequate water supply
F5
F6
Faulty heater sensor
Overheating error
(temperature in the
F7
machine is too high)
F9
Divisor position error
F8
Heater error
FE
Faulty electronic card
• Power off your machine and close the tap.
• Contact an Authorised Service Centre.
• Water discharge hose is clogged.
• The filters of your machine might be
clogged.
cannot
be
• Power off-on your machine and activate
the programme cancellation command.
• If the error continues, contact an Authorised
Service Centre.
• Close the tap.
• Contact an Authorised Service Centre.
• Make sure the water input tap is totally
open and that there is no water cut.
• Close the water input tap, remove the water
input hose from the tap and clean the filter at
the connection end of the hose.
• Restart the machine. If the problem persists,
contact an Authorised Service Centre.
• Contact an Authorised Service Centre.
• Contact an Authorised Service Centre.
• Contact an Authorised Service Centre.
• Contact an Authorised Service Centre.
• Contact an Authorised Service Centre.
40
CONTROL
Advertisement
Table of Contents
