Advertisement
Removing the CD mechanism assembly
Prior to performing the following procedure, remove
the clamper base / tray and the CD servo board.
1.
Remove the screw D attaching the CD mechanism
assembly.
2.
Move the CD mechanism assembly backward to
release the two joints b of the CD base on the front
side.
CAUTION:
When reassembling, fit the front part of the
CD mechanism assembly to the two
chassis joints b and attach the four
dampers correctly.
(See Fig.6, 7)
CD mechanism assembly
damper
damper
CD base
b
D
b
Fig.6
CD mechanism assembly
Fig.7
UX-L40R/UX-L30R
damper
damper
D
1-17
Advertisement
