Advertisement
UX-L40R/UX-L30R
Removing the Tuner board
Remove the metal cover.
1.
Disconnect the card wire from connector CN1 on the
tuner board.
2.
Remove the two screws E on the rear side and the
screw F on the side.
Removing the Optical digital board
Remove the metal cover.
1.
Disconnect the shield wire from connector CN905 on
the optical digital board.
2.
Remove the screw G on the rear side and the screw
H on the upper side.
1-8
(See Fig.6)
F
(See Fig.7)
G
CN1
Tuner board
Fig.6
Optical digital board
H
Fig.7
E
CN905
Advertisement
