Table of Contents
Advertisement
Broadcast wave and service area
■
The radio wave received via Mobacas/Full-Seg/1Seg differs from
that received via Xi services and FOMA services. Also, the radio
waves received via Mobacas, Full-Seg and 1Seg differ from one
another. Therefore, it cannot be received at a place where the
broadcast wave for Mobacas/Full-Seg/1Seg does not reach or
while the broadcasting is out of service, regardless of whether the
tablet is outside or inside the Xi service or FOMA service area.
Also, in the following places, the reception status may become
weak or the signal may not be received even if the tablet is inside
the area of a Mobacas broadcasting/terrestrial digital TV
broadcasting service.
Place that is far from the base station/radio tower which sends
the signal
Place where the signal is interrupted due to the landscape or
buildings such as mountainous areas or behind a building
Place where the signal is weak or does not reach, such as a
tunnel, basement or an inner area of a building
Improving reception status
■
Fully pull out the Mobacas/TV antenna and change its direction or
move to another place so that the reception status may become
better.
When you watch/record TV, you can connect the included USB
coaxial conversion cable and a household TV antenna etc. to
improve the reception status.
Mobacas/TV antenna
■
Tablet
Note the followings when you use the Mobacas/TV antenna on
the tablet.
Fully pull out the base of the Mobacas/TV antenna as shown
in the following illustration. The Mobacas/TV antenna may tilt
or wobble.
Do not apply excessive force on the Mobacas/TV antenna
when it is pulled out or when you change the direction of it.
When you stow the antenna, do not hold its tip and stow it
forcibly. Push it straightly down to its tip with its bottom fixed to
completely stow it.
If you apply excessive force on the antenna, it may be damaged.
USB coaxial conversion cable
Insert the microUSB plug of the USB coaxial conversion cable
horizontally into the external connector terminal on the tablet with
the side marked with "B" turned up and connect the USB coaxial
conversion cable and a household TV antenna etc. via a
commercially available antenna cable.
External connector terminal
microUSB plug
USB coaxial
conversion cable
Reception via cable TV
The tablet supports only the same frequency pass-through
method. When you receive Full-Seg with the USB coaxial
conversion cable, you cannot watch Full-Seg using methods
other than the same frequency pass-through method.
For details, contact the cable TV company you have subscribed
to.
Receiving Mobacas via cable TV is not available.
USB coaxial conversion cable
If you charge the battery etc. while watching/recording Full-Seg,
connect an AC adapter (sold separately) etc. to the microUSB
connector terminal of the USB coaxial conversion cable.
■
Recording
Record Mobacas/TV in a good reception status.
When you record TV, it is recommended to connect the USB
coaxial conversion cable and a household TV antenna etc. via a
commercially available antenna cable. When you use the USB
coaxial conversion cable, set Antenna settings to [External] to make
the reception status more stable.
Mobacas
1
In the home screen, [NOTTV]
: When you activate this app for the first time, initial settings
are carried out.
: Check the content of アプリ使用許諾契約書 (App license
agreement) and select [スタート] (Start).
2
[ホーム] (Home)
3
Select a program/content
4
Watch the program/content
: When you watch Real Time programs, you can switch
programs/contents by sliding the image to the left/right.
: To display in full screen: [u]/Switch to horizontal display
･ The display format of contents may differ depending on the
program/content.
: To display data broadcasting: [データ] (Data)
: To display a timeline related to the program/content: [ソー
シャル] (Social)
: To display detailed information: [インフォ] (Information)
: To adjust the volume: x/y
48
Keep side marked
with "B" up
microUSB
connector terminal
Antenna
cable
F-type connector
Apps
Advertisement
Table of Contents
