Panasonic KX-NCP0158 Quick Installation Manual page 44

8 Registering IP Cell Stations
3.
Select the desired classification for the CS in the CS Class column.
Note
For details about other parameters on this screen, refer to the PC Programming Manual for your PBX.
4.
Click Command to return the status of the port to "INS".
Setting the Synchronizing CS Search Order (Primary/Secondary)
The search order of each CS can be set by the following procedure:
1.
Under Maintenance, click Air Synchronization.
2.
Select the desired cell in the Connection column, and then click Command to change the status of the
port to "OUS".
3.
Select the desired CS number in the Index column for each Primary CS and Secondary CS.
Note
For details about other parameters on this screen, refer to the PC Programming Manual for your PBX.
4.
Click Command to return the status of the port to "INS".
De-registering the IP-CS
When uninstalling an IP-CS that has been installed once, de-register the IP-CS.
44 Quick Installation Guide Document Version 2009-06