Restarting The Ip Cell Station - Panasonic KX-NCP0158 Quick Installation Manual

13 Restarting the IP Cell Station

If the IP-CS does not operate properly, restart the IP-CS. Before restarting the IP-CS, try the system feature
again to confirm whether there definitely is a problem or not.
The IP-CS settings are changed back to their factory default by restarting the IP-CS. While restarting the IP-CS,
calls cannot be made or received and ongoing conversations will be disconnected.
1.
Switch the Initialized Mode switch from OFF to ON.
2.
Connect the IP-CS to the PBX over a LAN, and supply electricity to the IP-CS using an AC adaptor, PoE
hub, or PoE adaptor (turn on the IP-CS).
3.
While the LED indicator flashes red, switch the Initialized Mode switch from ON to OFF.
Document Version 2009-06
13 Restarting the IP Cell Station
DIP Switch
OFF ON
1
2
3
4
5
6
7
8
Initialized Mode Switch
Quick Installation Guide 57