Confirming The Status Of Air Synchronization For Ip Cell Stations - Panasonic KX-NCP0158 Quick Installation Manual

9 Confirming the Status of Air Synchronization
for IP Cell Stations
After registering the IP-CS to the PBX, it is necessary to monitor the status of air synchronization for the IP-CS.
If the monitoring results are not satisfactory, relocate the IP-CS or change the IP-CS that it is currently
synchronized with to another CS using the Maintenance Console.
Monitoring Air Synchronization
The status of air synchronization for IP-CSs can be displayed and collected by the following procedure:
1.
From the Utility menu, select CS Status Monitor.
2.
From the Interval Timer drop-down list, select the desired interval time for monitoring.
3.
Click Start to monitor the status of air synchronization.
Note
For details about other parameters on this screen, refer to the PC Programming Manual for your PBX.
4.
Confirm the value in the Monitored Level column.
The monitored level is indicated as follows:
Monitored Level
12 or higher
05 to 11
03 to 04
00 to 02
Document Version 2009-06

9 Confirming the Status of Air Synchronization for IP Cell Stations

May be reset due to synchronization failure of CSs.
Relocate the IP-CS or manually change the IP-CS that the target
IP-CS is currently synchronized with to a different CS.
Good.
Air synchronization is established.
it is necessary to monitor the status of synchronization using the
Maintenance Console. This is necessary because IP-CSs may be
reset due to synchronization failure if the radio signal strength
fluctuates depending on changes in the installation environment such
as opening/closing doors.
May be reset due to synchronization failure of CSs.
Relocate the IP-CS or manually change the IP-CS that the target
IP-CS is currently synchronized with to a different CS.
Description
Quick Installation Guide 47