Before Using For The First Time; Toasting - Silvercrest STD 950 A1 KAT Operating Instructions Manual

__300179_Toaster_B6.book Seite 6 Mittwoch, 31. Januar 2018 9:39 09
5. Before using for the
first time
1. Remove the packing material.
2. Unwind the desired length of cable
from the cable spool 9.
3. Figure A: Pass the power cable 10
out on the side and secure with the ca-
ble clamp 14.
4. Plug the mains plug 10 into an earthed
wall socket.
NOTE: The toaster may give off a smell
when first used. Therefore we recommend
operating the device two or three times with-
out bread on a medium toasting level leav-
ing the window wide open.

6. Toasting

CAUTION:
Do not lay bread, or anything else, on
top of the toasting compartments 2.
For rolls use the integrated bun warm-
er 1.
NOTE: The lowering lever 3, with which the
device is switched on, will only engage if
the device is plugged in.
Toasting bread
1. Put the bread in the toasting compart-
ment 2.
Do not use slices that are too thick. The
bread must not be trapped in the toast-
ing compartment 2.
2. Use the knob 5 to set the desired toast-
ing level. The toasting level can be set
between
- 1 = very light toasting / slight brown-
ing and
- 6 = very heavy toasting / very
strong browning.
6
GB
The result depends, among other factors, on
the type and freshness of the bread.
NOTES:
• Toasting level 6 causes very strong
browning. With thick slices, this can cre-
ate smoke. If this occurs, cancel the
toasting process by pressing the stop
button 4.
• If you place only one slice of toast into
the toaster, turn the rotary knob 5 for
the roasting level down by approx.
1 level to achieve the same darkness as
with 2 slices of toasts.
3. Press the lowering lever 3 down until it
locks into position. The bread is low-
ered and the device switches on. The
light around the stop button 4 lights up.
4. At the end of the toasting time the light
around the stop button 4 goes out and
the bread is lifted. Remove the bread.
Cancelling the toasting process
Press the stop button 4 to cancel the toasting
process early. The light around the stop but-
ton 4 goes out and the bread is lifted.
Toasting frozen bread
You do not need to change the toasting level
to toast frozen bread. Simply press the de-
frost button 6 after the lowering lever 3 has
locked into place. The light around the de-
frost button 6 lights up. The toasting process
is extended.
Reheating bread
If you would like to reheat an already toast-
ed piece of bread which has cooled, press
the reheat button 7 as soon as the lowering
lever 3 has locked into place. The light
around the reheat button 7 lights up during
reheating.
Warming up rolls
To warm up rolls, the toaster is provided with
an integrated bun warmer 1.