First Use; Assembly - Silvercrest SSMW 750 D2 User Manual

Cleaning and storage
m WARNING! Risk of
injury! Disconnect the
product from the power supply
before cleaning work and
when not in use.
Do not store the hot product
in a cupboard or in the
packaging.
Do not pull the power plug out
of the electrical outlet by the
power cord.
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping
and splashing water.
Store the product in a cool,
dry place, protected from
moisture and out of the reach
of children.
Protect the product against
heat. Do not place the product
close to open flames or heat
sources such as stoves or
heating appliances.
˜ First use
Remove the packaging. Check if all parts are
complete.
During production, some parts are covered
with a thin oil film for their protection.
Before first use, operate the product without
any food so that any potential residues
evaporate.
Clean the product and its accessories
(see "Cleaning and care").
NOTES:
The first few times the product is heated up, a
faint odour may be present. Ensure sufficient
ventilation in the area.
Discard the first set of grilled or baked food.
˜ Assembly
WARNING! Risk of electric
m
shock! Before installing/removing the
plates , , : Disconnect the power
[ 11 ] [ 12 ] [ 13 ]
plug from the wall outlet.
4 ] [
CAUTION! Hot surface! Do not change/
remove the plates
11 ] [
operation. Let the product cool first.
Installing the plates
Open the lock . Open the product.
1 ] [
Place the inner catch
into the large hook catches
Push down the plate until it clicks in place.
Repeat on the other side of the product.
NOTE: Install only plates of the same type.
, , right after
12 ] [ 13 ] [
of the chosen plate
10 ] [
.
7 ] [
GB 11