Table of Contents
Advertisement
Settings
The following settings can be performed anytime
in the Setup menu. (
Easy Settings
/Easy Network Setting
After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.
Preparation
Turn on the TV and select the appropriate
video input.
1
Press [Í].
Setup screen appears.
2
Follow the on-screen instructions to
continue with the settings.
(e.g., "Quick Start")
∫ When connected to a 4K (50p or
60p)-compatible TV
When connected to a 4K (50p or 60p)-compatible
TV, you can set the video output format.
4K(50p/60p) Output
Start connection check with your 4K TV.
Once connection check is started and if the video is not displayed
correctly, please wait for the next display. The connection check
could take up to 30 seconds to display the new message screen.
Start
OK
RETURN
Follow the on-screen instructions to set the
format.
≥ To reconnect this unit to a 4K (50p or 60p)-compatible TV
after connecting this unit to a 2K-compatible TV and
completing "Easy Settings", set "4K(50p/60p) Output" to
"4K(50p/60p) 4:4:4" or "4K(50p/60p) 4:2:0". (
≥ Refer to the operating instructions of the hub or router.
≥ If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
27, 28)
24)
Getting started
Firmware updates
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.*
When a new firmware version is available, the
following message is displayed.
New Version: X.XX
Current Installed Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Select "Yes" to start downloading the firmware.
When the firmware update starts after the
downloading is finished, a black screen is
displayed and the POWER LED flashes rapidly.
You cannot operate the unit until the update is
complete. Don't remove the AC mains lead during
the update. Removing the AC mains lead while
the update is in progress may damage the unit.
After the firmware is installed, unit will restart and
the following screen will be displayed.
The firmware has been updated.
Current Version
≥ You can also download the latest firmware from the
following website and store it to a USB device to
update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
When the update is complete the POWER LED will stop
rapid flashings and start flashing in a repeating pattern of
three flashes. Turn off and on the unit. (
≥ To show the firmware version on this unit. (
"Firmware Version Information")
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
You must agree to the terms of use for the Internet function
*1
and the privacy policy. (
"X.XX" represents the firmware version number.
*2
- 13 -
1
Firmware Update
Yes
No
OK
RETURN
: x.xx
27, "Legal Notices")
2
2
33)
28,
Advertisement
Table of Contents
