Table of Contents
Advertisement
Setup menu
Reference
Change the unit's settings if necessary. The
settings remain intact even if you switch the unit
to standby.
1
Press [HOME].
2
Select "Setup".
3
Select "Player Settings".
Player Settings
Video Format
HDMI
4K(50p/60p) Output
Picture
24p Output
Advanced Settings
Sound
3D
Language
Network
Ratings
System
OK
RETURN
4
Select an item and change the settings.
To exit the screen
Press [HOME].
HDMI
∫ Video Format
The items supported by the connected devices
are indicated on the screen as "¢". When any
item without "¢" is selected, the images may be
distorted.
≥ If "Automatic"*
is selected, the best suited
1
output resolution to the connected TV is
automatically selected.
∫ 4K(50p/60p) Output
This unit automatically chooses to output images
in 4K*
(50p/60p) when connected to a 4K (50p or
2
60p) compatible TV.
≥ This item is available only when "Video Format"
is set to "Automatic" and "4K".
≥ To connect to a TV that supports 4K (50p/60p)
4:4:4/8 bit or 4K (50p/60p) 4:2:2/12 bit, select
"4K(50p/60p) 4:4:4".
Images will not be output correctly with an
HDMI cable that does not support 18 Gbps.
(The supplied HDMI cable supports 18 Gbps.)
≥ To connect to a TV that supports 4K (50p/60p)
4:2:0/8 bit, select "4K(50p/60p) 4:2:0".
Reference
∫ 24p Output
Content recorded at 24p*
films, is output at 24p when played back.
≥ When this unit is connected to TV compatible
with 4K/24p and "Video Format" is set to
"Automatic" or "4K", images will be output in 4K/
24p.
≥ When this unit is connected to a TV compatible
with 1080/24p and "Video Format" is set to
"Automatic", "1080i" or "1080p", images will be
output in 1080/24p.
≥ If images output in 24p are distorted, change
Automatic
Off
the setting to "Off".
Automatic
∫ Advanced Settings
Press [OK] to show the following settings:
Colour Mode
This setting is for selecting colour-space
conversion of the image signal.
Deep Colour Output
Set the output method to be used when this unit is
connected to a TV that supports Deep Colour.
HDR (High Dynamic Range) Output
Output images in HDR (High Dynamic Range) format
depending on the content and connected device.
HLG / PQ Conversion
Set whether or not to convert HDR (High Dynamic
Range) videos in HLG format to PQ format before
outputting them when this unit is connected to a
TV that supports only HDR (PQ) format.
≥ When "HDR (High Dynamic Range) Output"
is set to "Off", this setting is disabled.
HDCP Output Setting
If you connect to a TV that does not support
HDCP2.2 via an amplifier or speaker, some
images may be displayed as black screens. In
that case, select "HDCP1.4 Limit".
Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
It displays images at the highest resolution available on
*1
your TV.
A high resolution image/display technology of
*2
approximately 4000 (width) k 2000 (height) pixels.
A progressive image recorded at a rate of 24 frames per
*3
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
- 24 -
, such as BD-Video
3
Advertisement
Table of Contents
