Table of Contents
Advertisement
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed in the table below.
1 Box Wrench ........................................... 1
(for securing cutter blade)
2 Set Gauge .............................................. 1
(for adjusting cutter height)
3 Guide ..................................................... 1
(with set screw)
P14DSL
4 Carbide Blade ........................................ 2
(2LSRK)
(Double edged Blade type)
(2LJRK)
5 Charger .................................................. 1
P18DSL
6 Battery ................................................... 2
(2LSRK)
[P14DSL] BSL1430 or BSL1450
(2LJRK)
[P18DSL] BSL1830 or BSL1850 or BSL1860
(2LYCK)
7 Plastic case ............................................ 1
8 Battery cover .......................................... 2
9 Spare carbide Blade set ......................... 1
(Not supplied in all areas)
0 Blade Sharpening Ass'y ......................... 1
(for Resharpenable Blade Type)
1 Box Wrench ........................................... 1
(for securing cutter blade)
2 Set Gauge .............................................. 1
(for adjusting cutter height)
3 Guide ..................................................... 1
(with set screw)
P14DSL (NN)
P18DSL (NN)
4 Carbide Blade ........................................ 2
(Double edged Blade type)
5 Blade Sharpening Ass'y ......................... 1
(for Resharpenable Blade Type)
Without chager, battery, plastic case and
battery cover.
Standard accessories are subject to change without notice.
10
OPTIONAL ACCESSORIES (sold separately)
1. Battery
(BSL1430)
(BSL1440)
(BSL1450)
2. Dust adapter
3. Elbow
5. Carbide Blade
(Double edged Blade
type)
Optional accessories are subject to change without notice.
APPLICATIONS
Planing various wooden planks and panels. (See Fig. 1-4)
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Figs. 5 and 6).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 6).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
<UC18YFSL>
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1-second intervals).
<UC18YSL3>
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1-second
intervals).
CAUTION
Do not use the electrical cord if damaged. Have it
repaired immediately.
2. Insert the battery into the charger. (Fig. 7)
Firmly insert the battery into the charger.
(BSL1830)
(BSL1840)
(BSL1850)
(BSL1860)
4. Dust bag
6. Blade
(Resharpenable blade
type)
Advertisement
Table of Contents
