Table of Contents
Advertisement
Frontal spacer
1
M4x12 screws
2
Unit connection
All the operations below require the appliance to be extracted from cabinet.
Remove the grid of the drip tray to easily pull out the Refreshment Centre. After extracting the
appliance, place the grid back in its original position.
Electrical connection
Warning Before starting the plug-in, make sure voltage and frequency match the related
information on the rating plate and on the technical specifications table.
Warning Make sure the main switch is in off position
Connect the appliance to the socket using the supplied cord.
When necessary, extract momentarily the power cord from the safety clip to make the connection to the
power socket easier.
Fix the supplied cord to the clip on the right side of appliance.
Unit positioning
11
Advertisement
Table of Contents
