Electrolux AEG PWE3810-M User Manual page 20

20 Maintenance and cleaning
3. Rotate the used filter cartridge clockwise and pull it down to extract it
4. Insert the new filter cartridge in the filter head by pushing it up and rotating it counter-clockwise
5. Turn on the power switch
6. Immediately press the ambient water icon and keep it pressed until LEDs start scanning.
Wait for all LEDs to turn off before proceeding with the next step
If the power LED becomes steady, please repeat the last two steps until LEDs start scanning.
7. Restart the appliance using the power switch
8. Push back the appliance until it is locked into position
9. Dispense 3 litres of cold still water
10. Dispense 1 litre of cold sparkling water
Cleaning of the inlet filter
Water inlet and inlet filter housing
1
Carry out this procedure on a yearly basis.
1. Close the water mains
2. Dispense ambient water until it stops coming out
3. Remove the grid of the drip tray to easily pull out the Refreshment Centre. After extracting the
appliance, place the grid back in its original position
4. Rotate the filter cartridge clockwise and pull it down to extract it
5. Take out the water inlet hose