Electrolux AEG PWE3810-M User Manual page 9

For a correct installation, take the single support
bracket and place it directly in contact with both the
shelf of the cabinet and the spacer if previously used.
Otherwise the bracket will be in direct contact with both
shelf and side of the cabinet.
After this first phase, align the support brackets to be flush with the front of the cabinet.
Use the upper holes to correctly mount the appliance at
the right height.
Warning Mount the screws perpendicularly to the cabinet in order to guarantee the correct
extraction of the sliding rails
A pilot hole is recommended for an easier assembly.
Extract the screws to continue the mounting.
Sliding rails installation
Position each rail on the side of the cabinet. Please note that there is a specific sliding rail for each side
of the cabinet.
Each sliding rail should be flush with the support brackets, with spacers when present and with the front
of the cabinet.
Spacer
1
Sliding rail
2
Support bracket
3
Unit positioning 9