Mass Storage Devices - HP Mini 110-1020 Maintenance And Service Manual

Mass storage devices

NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket.
Description
Hard drive (select models only)
250-GB, 5400-RPM
160-GB, 5400-RPM
Hard Drive Hardware Kit
Solid-state drive
64-GB
32-GB
16-GB
8-GB
Solid–state Drive Hardware Kit
Before removing the hard drive or solid-state drive, follow these steps:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
5. If your device has WWAN capability, remove the SIM (see
6. Remove the keyboard (see
To remove the mass storage assembly:
1. Loosen the Phillips SP2.5×10.0 captive screw (1), and remove the two Phillips PM2.0×5.0
screws (2) that secure the assembly to the device.
Battery on page 36).
Keyboard on page 40).
Spare part number
537635-001
537634-001
537641-001
537640-001
537639-001
537638-001
537637-001
537642-001
SIM on page 37.
Component replacement procedures 45