HP OmniBook 7100 User Manual page 27

To create a replacement smart card for use with Windows NT
Note Since you can no longer use your smart card to access your OmniBook, you will need
the NT Administrator smart card to regain access.
1 Insert the Administrator smart card in the smart card reader, and log on as the NT
2 Open the Encryption System Manager program.
3 Select the Logon tab (only accessible by the NT Administrator).
4 Click on the user name for which you wish to re-register a new smart card, and
5 Log off from your NT Administrator session and remove the NT Administrators
6 Insert a new (blank) smart card in the smart card reader. Log on to your
7 When you have entered your user name and password, a message appears telling
Administrator.
The list of active smart cards and users is now displayed.
then click on the Allow renewal button. The card state will change from "Card
registered" to "Card renewal allowed".
smart card from the smart card reader.
OmniBook as the user for which you wish to re-register the new smart card,
following the normal Windows NT logon procedure.
you that the card in the reader is now registered for your user account. You must
now use this smart card every time you log on to your Windows NT user
Creating a replacement smart card
3
1-21