Table of Contents
Advertisement
Troubleshooting
Problem
No image from
• Make sure the channel of the connected TV is
the Player
set to VIDEO or AV.
appears on the
• Make sure video and audio cables are
screen of a
connected correctly.
connected
device.
The volume of
• Change the "COMPRESSION" setting to "ON".
Dolby Digital
This setting compensates for the relatively low
audio from a
average volume level of Dolby Digital, which is
DVD is too low.
used to provide the widest possible dynamic
range.
The battery
• Make sure the Player is turned off. The battery
pack does not
pack does not charge when it is installed in the
charge.
Player while Player power is turned on.
• A warm battery takes longer than normal to
charge. Wait until the battery cools to normal
temperature before trying to charge it.
Power does
• Replace the battery pack with a charged one or
not turn on.
switch to AC adapter power.
Indicator lamp
• Charging of a battery pack may become disabled
does not light
(and the Indicator lamp may fail to light)
(battery pack
whenever heat from the Player causes the
does not
internal temperature of an installed battery pack
charge).
to rise above certain level. When this happens,
remove the battery pack from the Player.
Charging will start automatically when battery
pack internal temperature drops to a safe level.
• Make sure the temperature of the battery pack
is within the allowable temperature range of
10°C to 30°C for charging.
• Check to make sure that the AC adapter DC
cord is connected correctly.
Recommended Action
Page
31
56
36-38
104,
105
35-39
–
105
35
Advertisement
Table of Contents
