Table of Contents
Advertisement
3
Use ' and " to cycle through numbers at
the currently selected (highlighted)
position, and then press | to move the
highlighting to the right.
For example, to play the 15th chapters
first:
• Pressing | while "-" is displayed for a
digit enters "0" for the third digit.
• Use ' and " to cycle through numbers at the second digit until "1" is
displayed, and then press | to move the highlighting to the first digit.
Use ' and " to display "5" for the first digit, and then press | to move
the highlighting to the next chapter number.
• Repeat the procedure above if you want to input other chapter numbers.
You can input up to 20 chapters in the sequence in which you want
them to play.
4
After you have specified all chapter numbers you want, press | to move
the highlighting to the next. Then press ENTER to start play in the
sequence you specified.
• Chapters are played in the sequence you specified.
• When entering chapter numbers that do not exist on the disc in step 3,
this operation is disabled.
• Press RETURN if you want to exit the above screens.
• You cannot program the play sequence while a disc is playing.
• Play sequence programming does not work with a disc that does not include
chapter information.
• Play sequence programming does not work with a disc that disables
programming. The indicator ø is displayed when playing back such discs.
• Play sequence programming does not work immediately after you load a disc into
the Player. It can be used only after the disc has been played, even if only
partially.
To stop programmed play
1
Press Ë (STOP).
• The number you input is not stored in memory if there is no corresponding
chapter number on the disc. Make sure you input chapter numbers correctly.
• If you input the wrong number, press \ and then re-input.
• To exit the programming procedure part way through, press RETURN.
Programmed Playback
CHAPTER PROGRAM
=TITLE: 12
=CHAPTER
‰
CHAPTER PROGRAM
=TITLE: 12
=CHAPTER
‰1
Advertisement
Table of Contents
