Setting The Temperature; Ironing With Steam - Bosch TDS2021GB Operating Instructions Manual

Setting the temperature

1. Check the ironing instruction label on the
garment to determine the correct ironing
temperature.
2. Turn the temperature selector (14) to the
required setting:
•
••
•••
3. The indicator lamp (17) will remain lit while the
iron is heating and go out as soon as the iron
has reached the selected temperature.
Tips:
• Sort your garments out based on their
cleaning symbol labels, always starting with
clothes that have to be ironed at the lowest
temperatures.
• If you are not sure what the garment is made
of then begin ironing at a low temperature and
decide on the correct temperature by ironing
a small section not usually seen when worn

Ironing with steam

1. Turn the temperature selector (14) to the
required setting.
2. Set the amount of steam to suit your needs,
using the variable steam control (10*).
* model dependent
Synthetics
Silk – Wool
Cotton – Linen
��
�� ��
For normal use, please choose one of the
following recommended settings:
Temperature
•
••
•••
3. Press the steam release button (15 or 16*) to
release steam.
��
��
���
��
Attention:
When ironing on a lower temperature setting "•".
• If the appliance has variable steam control
(10*), set the variable steam control to its
lowest position .
• If the appliance does not have variable steam
control, press the steam release button only
for a few seconds at a time when ironing at
lower temperatures.
In both cases, if you find that water is dripping
out of the soleplate, set the temperature
selector (14) to a higher position (take care
that the garment can be ironed on this heat
temperature setting).
en
��� �� �
��� � ��
Steam setting
�
��