Table of Contents
Advertisement
2 ) Mounting procedure
1. Remove the hole rivets (eight points) indicated by the
arrows using a coin or the like.
2. Install two metal fixtures to the bottom of the plasma
display using the hexagonal socket button bolt and
washer, according to the outer shape of the fixture.
2
3
2
2
3
3
1
Mounting standard metal fixtures (PDA-4002)
3. The metal fixture installed (seen from the back of
4. Assembling the filter
2
3
1
plasma display)
2, 3
1
Place the filter with the light-accepting window at the
bottom, as shown. Peel off the protective film from
the rear of the filter, then attach the metal fixture 1 at
the two positions on top of the filter in the direction
indicated in the drawing, using the decorative screws.
5
D
4
2, 3
1
1
1
5
Light-accepting
window
121
Advertisement
Table of Contents
