Table of Contents
Advertisement
Performing adjustments on the plasma display operation panel
1
Remote control
P I CTURE PARAMETER
Main unit
2
ADJUST
P I CTURE PARAMETER
Remote control
MENU
• Return to the normal screen.
Main unit
MENU
CONTRAST
: ADJ.
SET : EXIT
+ 1 0
CLK. FRQ.
: ADJ.
SET : EXIT
and remote control
Adjust the picture quality concerning
the selected item.
1 In case of CONTRAST and BRIGHT:
2 In case of CLK.FRQ., CLK PHS., HOR.POS. and
VER.POS.:
To return to the step-2 screen, press the SET button.
Repeat steps 2 through 4 to adjust the other items.
When you have completed the setting,
return to the normal screen.
NOTE:
When the interlaced signals such as NTSC, PAL(PDP-
V402E only), etc. are input from the RGB input terminal,
adjust the HOR. POS. and VER. POS. (horizontal and
vertical positions) so that the image becomes positioned
in the center of the screen.
The picture may not be reproduced properly if the
positions are altered extremely from the original ones.
141
Advertisement
Table of Contents
