Advertisement
to prevent accidental damage to your VCP and TV.
Do not operate your VCP if it is damaged.
Your VCP should not be repaired by anyone except
qualified service personnel.
Never remove the back cover of your VCP as this can
expose you to very high voltage and other hazards. If
your VCP does not operate properly, please check the
Troubleshooting Guide on page 16. If your VCP still
does not operate properly, unplug it and call your
dealer.
If the unit is suddenly moved from a cold place to a
warm place, do not operate it for two or three hours.
Moisture condensation on the head drum, one of the
most crucial parts of the unit, will cause damage to the
tape. If you experience the above condition, plug the
Thank you for buying
mains lead into an AC outlet, set the STANDBY/ON
this video cassette
switch to ON, and leave at room temperature until
player.
moisture condensation disappears.
I am LG
Service
Warning
Character and
based on
exclamation
Ensure that your VCP is placed in a position to allow a
mark that
free flow of air.
means customer's
impression.
I should like to help
you to get to know your
new video player.
2
Position your VCP so that no bright light or
sunlight falls directly onto it.
Care should be taken not to expose your
VCP to any unnecessary vibration,
moisture, dust or heat.
During electrical storms it is advisable to
unplug both the aerial cable and mains plug
This product is manufactured to comply
with the radio interference requirements of
EEC DIRECTIVE 89/336/EEC, 93/68/EEC
and 73/23/EEC.
This appliance is supplied with BS 1363 approved 13
Amp fused mains plug. When replacing the fuse always
use a 5 Amp BS 1362 approved type.
Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your
supplying dealer or LG Electronics U.K. LTD.
If the mains sockets in your home differ, or are not suit-
able for the type of plug supplied then the plug should
be removed and a suitable type fitted.
If the mains plug becomes severed from the mains lead
it must be destroyed. A mains plug with bared wires is
hazardous if engaged in a mains output line socket.
If a 13 Amp BS 1363 plug is not suitable or any other
type of plug used, then this appliance must be
protected by a 5 Amp fuse.
Should you need to change the plug
The wires in this mains lead are coloured in accordance with
the following codes
BLUE ~ Neutral
BROWN ~ Live
GREEN & YELLOW ~ No connection to be made
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows :
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
DO NOT connect the wire which is coloured GREEN &
YELLOW or GREEN.
Advertisement
