Advertisement
This VCP is designed to play back and record cassettes using PAL and MESECAM colour systems. Your VCP may
also play back recordings from NTSC colour system. You will only be able to load and eject video cassettes
when your VCP is plugged into the mains.
Getting a better picture
When a cassette is inserted and playback started, the automatic tracking function works to get the best
possible picture automatically. "AUTO TRACKING" will appear on the TV screen while it is doing this. If the
quality of the recording is poor, repeatedly press
any distortions have been removed.
1
Make sure that you have
correctly installed your
VCP as described earlier in
this book.
Press POWER to turn on
your VCP.
Turn on your TV.
POWER
REC
or
2
Insert the video cassette
into your VCP. The video
cassette should have the
window side facing up and
the arrow facing away from
you.
Do not attempt to force a cas-
sette into your VCP. There may
already be a video cassette in
your VCP. You may have the
cassette upsidedown or back to
front!
on the remote control to manually adjust the tracking until
3
Check your tape
programme system before
playing back a tape.
Set the corresponding
system from the On Screen
Display. (see page 8.)
Press PLAY to start playing
your tape.
If you load a video cassette
which has had its record
protection tab removed (e.g
rental movies from video hire
shops) playback of the cassette
will start automatically.
PLAY
REW
FF
PLAY SP
If you set SYSTEM to
AUTO, your VCP detects
the colour system
automatically.
If there are colour
problems with very
weak signals, you
should select the
colour system manually.
9
Advertisement
