Copying Id Card - Canon imageCLASS D1120 Basic Operation Manual

Multiple Documents onto One Sheet (2 on 1)
2
Press
3
Press [Collate/2 on 1] repeatedly to
select <2 ON 1>, then press [OK].
2 O N
– If you want to use <2 ON 1> and "Collating
Copies" (see p. 3-19) at the same time, select
<COLLATE+2 ON 1>, then press [OK].
– If you want to use <2 ON 1> and the 2-sided
copying at the same time, go to step 3 of "1 to
2-Sided Copying" (see p. 3-25), "2 to 2-Sided
Copying" (see p. 3-26), or "2 to 1-Sided
Copying" (see p. 3-27).
4
Use –
desired copy quantity (1 to 99).
6 4 %
5
Press [Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning is
complete, press [OK].
– To cancel all settings, press
– A maximum of 1/8" (4 mm) margin will be
produced between the two reduced
documents in 2 on 1 copying.
3-22
[COPY].
1
[numeric keys] to enter the
* L T R
T E X T / P H O T O
[Stop/Reset].

Copying ID Card

You can make copies of a card printed on both sides
like an ID card. The printed images on the front-
back both sides of a paper are placed on exactly the
same position like the original card.
– You must place a document on the platen glass when using
this function.
– The zoom ratio will automatically be set to <100%> with this
feature. You cannot change the copy size.
– The ID card copy function can be used for LTR size paper if
you select <INCHES> in <PAPER SIZE GROUP> in <COPY
SETTINGS>, and for A4 if you select <A> or <AB>.
– When you select the ID card copy, the other copy settings you
made, such as the copy ratio and paper size, will be canceled
automatically.
– This function cannot be used with the 2 on 1 mode, the
collating mode, or the 2-sided copying mode.
1
Place a card on the platen glass.
0 1
– Place a card as indicated below.
– Align the center of a card with the arrow
mark.
2
Press
3
Press
select <ID CARD COPY>, then press [OK].
I D
[COPY].
[Collate/2 on 1] repeatedly to
C A R D C O P Y