ChangNg Standard Mode; Changing Standard Mode - Canon imageCLASS D1120 Basic Operation Manual

Changing Standard Mode

Changing Standard Mode
The Standard mode is the combination of copy modes that the machine automatically
applies when the power is turned ON, or when
the Standard mode to suit your needs. The default settings are as follows:
– <IMAGE QUALITY>: <TEXT/PHOTO>
– <DENSITY>: <MANUAL> (5)
– <ZOOM RATIO>: <PRESET RATIO> (100%)
– <COPIES>: <1>
– <COLLATE>: <OFF>
– <2-SIDED>: <OFF>
– <PAPER SELECT>: <AUTO>
1
Press [Menu].
2
Press or
SETTINGS>, then press [OK].
M E N U
3 . C O P Y
3
Press or
SETTINGS>, then press [OK].
C O P Y
1 . S T A N D A R D
3-30
to select <COPY
S E T T I N G S
to select <STANDARD
S E T T I N G S
S E T T I N G S
[Stop/Reset] is pressed. You can change
4
Press or
setting item, then press [OK].
S T A N D A R D
1 . I M A G E
You can specify the following settings:
<IMAGE QUALITY>, <DENSITY>, <ZOOM
RATIO>, <COPIES>, <COLLATE>, <2-SIDED>,
<PAPER SELECT>
If you press [Stop/Reset] before pressing [OK],
the setting will not be registered.
5
Press [Stop/Reset] to return to the
standby mode.
to select the desired
S E T T I N G S
Q U A L I T Y