HP Compaq Presario,Presario EZ2600 Supplementary Manual page 14

Hp compaq presario,presario ez2600: supplementary guide
Hide thumbs Also See for Compaq Presario,Presario EZ2600:
Table of Contents

Advertisement

To run a test, complete the following steps:
1.
2.
3.
* * * *
4.
When the tests are complete, the progress bar in the Status window will be green if
the test was successful and red if the test failed. The lower part of this tab gives
details of the tests that have been completed.
The Log tab lists all the tests and also gives information about the number of times
each test was run, the time taken for the test, and the number of errors detected. To
save this information, click the Save button at the bottom of the window.
The Error tab provides details about the errors detected, including error codes. This
code is useful information for a Compaq technician who can advise you on how to fix
your computer.
2-8
Click the Test tab.
Choose the type of test: Quick, Complete, or Custom. In Custom, you will
need to check the boxes in the Component List for each test you want.
Select Interactive Mode or Unattended Mode.
HINT:
You can select Quick or Complete as a starting point for a Custom test. If you
select Interactive Mode, stay with your computer for the interactive test portions.
Click the Begin Testing button at the bottom of the window. The Status tab will
automatically replace the Test tab on your window. You can follow the progress
of individual tests on this window.
Understanding Your Service and Support Tools

Advertisement

Table of Contents
loading

Table of Contents