Table of Contents
Advertisement
Figure 13
1. Log
2. Endplate—Rail horizontal
position
Important:
Never attempt to split logs
across the grain.
Figure 14
7.
Move the control lever to the F
to split the log.
8.
Move the control lever to the R
to return the splitting wedge.
9.
Shut off the engine when you are finished
splitting logs.
g312579
3. Endplate—Rail vertical
position
g206160
position
ORWARD
position
EVERSE
After Operation
After Operation Safety
•
Shut off the engine, wait for all movement to stop,
and allow the machine to cool before adjusting,
cleaning, storing, or servicing it.
•
Clean debris from the muffler and engine to help
prevent fires. Clean up oil or fuel spills.
•
Allow the engine to cool before storing the machine
in any enclosure.
•
Shut off the fuel before storing or transporting the
machine.
•
Never store the machine or fuel container where
there is an open flame, spark, or pilot light, such
as on a water heater or on other appliances.
•
Keep all parts of the machine in good working
condition and all hardware tightened.
•
Replace all worn or damaged decals.
Towing Safety
Check with your local county or state towing safety
regulations before towing the machine.
•
In order to reduce the possibility of an accident
while transporting the machine on public roads,
ensure that the towing vehicle is mechanically
sound and in good operating condition.
•
Shut off the engine before transporting the
machine.
•
Ensure that the ball hitch you are using is the
proper size for the hitch receiver on the machine.
•
Inspect the hitch and coupling for wear. Never tow
the machine with damaged or defective hitches,
couplings, chains, or other components.
•
Check the tire air pressure on the towing vehicle
and the machine.
•
Check the tire tread and sidewall for damage and
wear.
•
Properly attach the safety chains to the towing
vehicle.
•
Ensure that the directional and brake lights are
working properly.
•
Ensure that the directional, backup, and brake
lights of the tow vehicle are working properly (if
equipped).
•
Before towing, ensure that your machine is
correctly and securely attached to the towing
vehicle.
•
Ensure that the safety chains are properly secured
to the vehicle, and leave enough slack for turning.
•
Do not carry any material in the machine when
towing.
14
Advertisement
Table of Contents
