Connecting and Checking the
Lights
1.
Connect the electrical plug of the machine with
the electrical plug of the tow vehicle
Figure 17
Note:
The machine uses a standard 4-pin, flat
plug. If your tow vehicle has a different type
of plug, obtain an adapter from an automotive
parts store.
2.
Ensure that the tow vehicle is in N
engage the parking brake, and start the engine.
3.
Test the lights as follows:
A.
Turn on the headlights of the tow vehicle.
Note:
The tail lights of the machine should
illuminate.
B.
Press the brake pedal of the tow vehicle.
Note:
The brake lights of the machine
should illuminate.
C.
Operate each turn signal of the tow vehicle
in turn.
Note:
The corresponding turn-signal lights
of the machine should illuminate.
(Figure
17).
g020828
,
EUTRAL
17