Table of Contents
Advertisement
Checking the Wheel Lug
Nuts
Service Interval: After the first hour
After the first 10 hours
Yearly
Check and torque the wheel lug nuts to 108 to 122
N∙m (80 to 90 ft-lb).
Hydraulic System
Maintenance
Hydraulic System Safety
•
Seek immediate medical attention if fluid is injected
into skin. Injected fluid must be surgically removed
within a few hours by a doctor.
•
Ensure that all hydraulic-fluid hoses and lines are
in good condition and all hydraulic connections
and fittings are tight before applying pressure to
the hydraulic system.
•
Keep your body and hands away from pinhole
leaks or nozzles that eject high-pressure hydraulic
fluid.
•
Use cardboard or paper to find hydraulic leaks.
•
Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic
system.
Hydraulic Fluid
Specifications
Hydraulic tank capacity: 30 L (8 US gallons)
Hydraulic fluid type: Toro All Season Hydraulic Fluid
Note:
Many hydraulic fluids are almost colorless,
making it difficult to spot leaks. A red dye additive for
the hydraulic system fluid is available in 20 ml (0.67
fl oz) bottles. One bottle is sufficient for 15 to 22 L
(4 to 6 US gallons) of hydraulic fluid. Order Part No.
44-2500 from your Authorized Service Dealer.
Checking the
Hydraulic-Fluid Level
Service Interval: Before each use or daily
Note:
The best time to check the hydraulic-fluid level
is when the machine is cool, before you start it for
the day.
1.
Park the machine on level ground, adjust the
jack stand to ensure that the machine is level,
and fully retract the splitting wedge.
2.
Shut off the engine. Allow the machine to cool
completely.
3.
Lower the rail to the horizontal position; refer
to
Lowering the Rail to the Horizontal Position
(page 13)
4.
Clean around the breather cap
26
(Figure
33).
Advertisement
Table of Contents
