Figure 10
Install the Carrier Card in the Cisco AS5400XM Universal Gateway
Align the captive screws with their holes, and seat the card completely.
Step 4
Tighten the two captive screws to secure the carrier card to the chassis. (See Figure 11 and Figure 12.)
Step 5
Figure 11
Tighten the Captive Screws on the Cisco AS5350XM Universal Gateway
Captive screw
Figure 12
Tighten the Captive Screws on the Cisco AS5400XM Universal Gateway
Captive
screw
Step 6
If the carrier card has a blank feature card slot, install a blank cover over the open feature card slot to ensure proper
airflow inside the chassis.
Figure 13
Blank Feature Card Cover
10
Captive screw
Captive
screw