Maintenance Operations; Every Shift - Toro 007 Maintenance Manual

TKU--- C 01140--- 1 EN 0404
3.

MAINTENANCE OPERATIONS

3.1. Every shift

D D D D Check engine oil
Machine on level ground. Measure oil
level with engine stopped (after stopping the
engine, allow oil drain to the crankcase for
about 20 minutes before checking the oil
level).
The oil level must be between the LOW
and FULL marks on the dipstick.
D D D D Check V- -belts
Check condition visually and adjust if
necessary.
Check belt for worn, grease--coated, oil--
soaked, or missing material. Replace
if necessary.
D D D D Check engine coolant level
Check before starting the engine.
Coolant level should be seen via the sight
glass.
Do not remove the pressure control cap or
attempt to drain the coolant until the engine
has cooled.
Use extreme caution when removing the
cap. A sudden pressure release from a
heated cooling system can result in a
loss of coolant and possible
injury (scalding, eye injury, etc.) from
the hot liquid.
MAINTENANCE OPERATIONS
17 (64)