Advertisement
White stains are left on crockery,
Tea stains or traces of lipstick
glasses have a milky appearance
have not been completely removed.
- Detergent does not have a sufficient
- Not enough detergent was added to input
- Washing temperature was set too low.
compartment.
- Amount of rinse-aid was set too low.
Traces of rust on cutlery
- If you used a phosphate-free detergent,
- Cutlery is not sufficiently rustproof.
try a detergent containing phosphates
and compare results.
Dishes, cutlery,etc.have not been
Glasses become clouded
and discoloured;coating cannot
dried or disinfected
be wiped off
- Selected programme did not include
drying function function.
- Unsuitable detergent was used.
- Amount of rinse-aid was set too low.
- Items were removed from dishwasher
- Glasses are not dishwasher-proof.
too soon.
Smears left behind on glasses
Glasses have a dull appearance
and culery; glasses have acquired
- Amount of rinse-aid was set too low.
a metallic appearance
Items were removed from from dishwasher
- Amount of rinse-aid set too high.
too soon.
Glasses have a dull appearance
- Amount of rinse-aid was set too low.
bleaching effect.
Other information
In order to function correctly the dish-
Notes on waste disposal
washer must be properly installed. Speci-
Old appliances still have some residual value.
fications for the water intake and waste-
An envoiment-friendly method of disposal will
water drainage, as well as electrical
ensure that valuable raw materials can be
connections, must fulfil the criteria that are
recovered and used again.
set out in the following paragraphs and the
installation instructions.
When an appliance has reached the end of
When installing the dishwasher, carry out
its working life,unplug it from the mains. Cut
tasks in the following order:
through the mains cable and dispose of it
- Check contents of delivery upon receipt,
together with the plug.
- Site dishwasher,
- Connect drainage hose,
Destory the door locking mechanism. This
- Connect inlet hose to water supply,
will ensure that children at play cannot be-
- Connect dishwasher to electricity supply.
come locked inside and are mot exposed to
Checking contents of delivery
the risk of suffocation.
All functions of your dishwasher have been
thoroughly tested in the factory. A small
Your new appliance was protected by suit-
number of water marks have been left on
able packaging while it was on its way to you.
the dishwasher as a result. They disap-
All materials used for this purpose are envi-
pear as soon as the appliance is used for
ronment-friendly and can be recycled. Please
the first time.
make a contribution to protecting the envi-
Siting the dishwasher
ronment-friendly and can be recycled. Please
Dimensions associated with siting the dish-
make a contribution to protecting the
washer are contained in the installation
enviroment by disposing of the packaging.
instructions. Ensure that the appliance is
There is a risk of suffocation by the cardboard
completely level by adjusting the feet.
boxes and the plastic wrapping.
Make sure that it is standing on a firm
surface.
Up-to-date information cerning options for
Drainage connection
disposal can be obtained from your retailer
or local municipal administration.
See the installation instructions for details
of procedure to be followed.
If necessary, fit a siphon trap (U-bend)with
a connecting piece for the drainage hose.
Connect the drainage hose to the trap
using the enclosed parts.
Installation
Advertisement
