Download Print this page

Haier BFD45W Installation Instructions Manual page 9

Domestic dishwasher
Hide thumbs Also See for BFD45W:

Advertisement

Safety information
At time of delivery
- Built-under and built-in appliances should
- Check packaging and dishwasher
immediately for signs of transport
damaged. If the appliance is damaged,
do not put into use but contact your
supplier without delay.
- After the appliance has been installed,
- Please dispose of packaging materials
properly.
During installation
During normal use
- Site the dishwasher and connect it up in
- Use the dishwasher solely in a domestic
accordance with the installation
instructions.
- The dishwasher must not be connected
to the electricity supply while installation
- Do not place any heavy objects or stand
is being carried out.
- Ensure that the domestic wiring is
properly earthed.
- The water inside the dishwasher is not
- The mains electricity supply must
conform to the details shown on the
- Do not use solvents of any kind inside
dishwasher nameplate.
- Do not connect the dishwasher to the
electricity supply via an extension cable.
- Open the door very carefully if the
- Not on all models:
The plastic housing on the water input
contains an electrically operated valve.
If your family incldes children
The connecting wires are inside the
- Do not permit small children to play with
inlet hose.Do not cut through this hose
and do not immerse the plastic housing
- Keep children away from detergents
in water.
- Keep small children away from the open
always be installed under a continuous
work surface which is attached to the
adjacent cupboards, in order to ensure
that the appliance is entirely stable.
the mains plug should still be easily
accessible.
environment and for its designated
purpose:washing household tableware
and other utensils.
on the door when it is open. The apliance
could tip forward.
suitable for drinking.
your dishwasher. They could cause an
explosion.
dishwasher is operating. There is a
risk of water squirting out.
or operate the dishwasher.
and rinse-aids.
door of the dishwasher. There could still
be some detergent left inside.
Getting to know your
dishwasher
If a fault occurs
Illustrations of the control panel and the
- Repairs or other work on the dishwasher
interior of the dishwasher are shown on
should only be carried out by a qualified
the rear of cover of this manual. Fold this
specialist.
page out before you read
- The dishwasher must be disconnected
the manual.
from the electricity supply before any
Control panel
repairs or other work are started. Pull
1 Main switch
the mains plug out of the wall socket
2 Delay timer
or switch off at the fuse box. Grasp the
3 Numerical display
plug to remove it from the socket;do not
4 Power Indicator
tug on the cable. Turn the water off at
5 Door handle
the tap.
6 Programme button
When disposing of old
7 Programme Button
appliances
8 Programme Button
- Appliance that have reached the end of
9 Start/Pause
their service life should be rendered
inoperable in order to exclude the
Appliance interior
possibility of subsequent accidents.
10 Lower rack
Pull the mains plug out of the wall socket,
11 Upper rack
cut through the connecting cable and
12 Middle sprayer
disable the door lock.
13 Lower sprayer
- Take the appliance to a designated
14 Filter
waste dipasal centre.
15 Dispenser for detergent and rinse
liquid

Advertisement

loading

This manual is also suitable for:

Bkd45wWqp6-2