Bosch UniversalTemp Original Instructions Manual page 19

make the measurements inaccurate. Otherwise, object temperatures could be shown
to be hotter or colder than they are, which may present a danger if touched.
Temperature measurements will only be correct if the emissivity setting
u
matches the emissivity of the object. Otherwise, object temperatures could be
shown to be hotter or colder than they are, which may present a danger if touched.
Take the batteries out of the measuring tool when it is being stored or transpor-
u
ted. Persons are at risk of being blinded if the on/off switch is unintentionally
pressed.
Product Description and Specifications
Please observe the illustrations at the beginning of this operating manual.
Intended Use
The measuring tool is intended for contactless measurement of surface temperature.
The measuring tool must not be used for temperature measurement on persons and an-
imals or for other medical purposes.
The measuring tool is not suitable for surface temperature measurement of gases or li-
quids.
The measuring tool is not intended for temperature measurement of food.
The measuring tool is not intended for commercial use.
The measuring tool is suitable for indoor use.
Product Features
The numbering of the product features shown refers to the illustration of the measuring
tool on the graphic page.
(1) Laser beam outlet aperture
(2) Infrared beam reception lens
(3) Measuring button
(4) Battery compartment cover
(5) Locking mechanism of the battery compartment cover
(6) Laser warning label
(7) Serial number
(8) Mode button
(9) On/off button
Bosch Power Tools
English | 19
1 609 92A 7MA | (10.06.2022)