Table of Contents
Advertisement
6. Select SUB TINT in EVR adjustment mode and increase level B 1
click above the same level.
7. Select SUB BRIGHT in EVR adjustment mode and reset to the
original value.
7.3.9. V. HEIGHT/H. POSITION ADJUSTMENT
Purpose:
To set the standard vertical and horizontal picture size.
Symptom of Misadjustment:
The picture size is on the vertical and horizontal axis is abnormal.
Test Point :
----------
Adjustment :
V SIZE (EVR),
H-CENTER (EVR),
V POSITION (EVR)
(For model with 13/25 inch CRT)
Specification :
Refer to descriptions below.
INPUT :
Video Input Jack,
Monoscope Pattern Signal
Mode :
STOP
Equipment :
NTSC Video Pattern Generator
Fig. E8-2
64
Advertisement
Table of Contents
