Silvercrest SURQ 4 A1 Operating Instructions And Safety Instructions page 20

SilverCrest SURQ 4 A1
•
The day of the week starts flashing. Set the correct day of the week using the [ ] (3) or [ ] (9)
buttons based on the table below and then confirm your selection by pressing the [
or [ ] (11) button.
Next, you can set a time period every day during which the display is automatically set to the lowest
level.
•
"AUTO DIM" appears at the bottom of the display, and "ON" or "OFF" flashes above it.
•
If you do not wish to use the function, use the [ ] (3) or [ ] (9) buttons to select "OFF" and
confirm your selection by pressing the [
or
•
If you wish to use the function, use the [ ] (3) or [ ] (9) buttons to select "ON" and confirm
your selection by pressing the [
•
"DIMSTART" appears at the bottom of the display, and a default start time above it. The hours
start flashing. Set the hours you want using the [ ] (3) or [ ] (9) button. Confirm your selection
by pressing the [
•
The minutes start flashing. Set the minutes you want using the [ ] (3) or [ ] (9) buttons. Confirm
your selection by pressing the [
•
"DIM ENDS" appears at the bottom of the display, and a default end time above it. The hours
start flashing. Set the hours you want using the [ ] (3) or [ ] (9) button. Confirm your selection
by pressing the [
•
The minutes start flashing. Set the minutes you want using the [ ] (3) or [ ] (9) buttons. Confirm
your selection by pressing the [
display brightness dimming time.
Manual time setting is now complete and the set time is shown on the display (1).
18 - English
d-1 Monday
d-2 Tuesday
d-3 Wednesday
d-4 Thursday
d-5 Friday
d-6 Saturday
d-7 Sunday
] (15) or [
] (15) or [ ] button (11).
] (15) or [
] (15) or [ ] button (11).
] (15) or [
] (15) or [ ] (11) button.
] (11) button.
] button (11).
] button (11). You have finished setting the
] (15)