Mitsubishi Electric A1S66ADA User Manual page 16

3 SPECIFICATION
Table 3.2 Performance specification of the A1S66ADA (continued)
Item
D/A conversion
(accuracy against the
Overall
maximum value)
accuracy
A/D conversion
(accuracy against the
scale)
Insulation method
Number of occupying I/O points
Connecting terminal base
Applicable wire size
Applicable solderless terminal
5 V DC internal current consumption
Voltage
External power
Current
supply
consumption
Weight
3 - 3
Voltage output
Within ±1% (±100 mV)
Between I/O terminals and PLC power supply········Photocoupler isolation
1 The analog output range is set commonly for CH1 to CH2.
2 The conversion speed refers to the speed between the times when a digital value is written to the
A1S66ADA and when an analog output which corresponds to the aforementioned value begins to be
outputted.
3 The analog input range is set commonly for CH3 to CH6.
4 The conversion speed refers to the speed while a change in an analog input is converted to a digital
output. (Excluding the sequence scan)
5 Inputs and outputs are assigned to the same number. Therefore, the I/O occupied points are 64.
POINT
When utilizing the peripheral device to assign the I/O numbers, set it as a 64-point
output module.
Performance specifications
Within ±1% (±40)
Between each channel········No isolation
64 points (Input 64 points, output 64 points)
20-point terminal base (M3.5
0.75 to 1.25 mm
R1.25 - 3 1.25 - YS3 2 - 3.5 2 - YS3A
V1.25 - M3 V1.25 -YS3A V2 - S3 V2 - YS3A
0.21 A
21.6 to 26.4 V DC
0.16 A
0.33 kg
MELSEC-A
current output
Within ±1% (±200 μA)
5
7 screws)
2
3 - 3