Siemens Gigaset USB Stick 108 Manual page 24

WPA-PSK
WPA-PSK can be operated with TKIP protocol or the new AES standard, depending on
which standard is supported by the Access Point.
ì
In the Encryption field, select the required encryption method (TKIP or AES).
Remember that when selecting encryption, two connection partners must use the
same type of encryption.
ì
In the Pre-shared Key (PSK) field, enter the key you would like to use for
registration on the network.
Note that all components in a network must use the same Pre-shared Key (PSK) to
be able to communicate with each other.
If you would like to register on a network in Infrastructure mode, first define a Pre-
Shared Key (PSK) on your wireless router for your network. Then use this for all
remaining components in your network. You can find more information in the user
manual for your wireless router.
ì
Click Apply to accept the changes.
Configuring the Gigaset USB Stick 108
23