Siemens Gigaset USB Stick 108 Manual page 25

Configuring the Gigaset USB Stick 108
WEP
ì
For the Authentication Type, select the default setting Open. The Shared setting
is normally only used in networks with authentication. Contact your administrator
for more information.
ì
In the Key Length field, select the required length of the WEP key.
Note that all components in a network must use the same key length to be able to
communicate with each other.
Use a key of length 128 bit, if all network components support this. This offers
greater protection for the data in your network.
ì
In the Key Type field, select the character format for creating keys:
– HEX
The keys are entered as hexadecimal characters. Please only use the digits 0 to 9
and the letters A to F when entering. For a key with length of 128 bits, 26
hexadecimal characters are used, and for a key with length of 64 bits, 10
hexadecimal characters are used.
– ASCII
The keys are formed from characters of the ASCII character set. For a key with
length of 128 bits, 13 characters are used, and for a key with length of 64 bits, 5
characters are used.
24