Bluetooth Device; Reset - Silvercrest HG08181A Operation And Safety Notes

If the headphones do not pair to each other, reset them
to the default settings (see "Reset") .
When the headphones are paired to each other and
are awaiting connection to a Bluetooth device, the
master headphone flashes red / white and the slave
headphone white only .
NOTE: The slave headphone connects to the master
headphone only . The master headphone connects to
the Bluetooth device .
˜ Pairing the headphones with a

Bluetooth device

Remove the headphones from the charging ports
When the headphones are ready to pair, the indicator
LED on the master headphone flashes red/white .
NOTES:
If the headphones have already been paired to each
other, the slave headphone is already connected to the
master headphone and flashes white only .
A signal sounds once the headphones are paired to
each other .
[ 8 ]
.
GB/IE/NI 31