Advertisement
Available languages
Available languages
Manual do Usuário - EchoLife
ET325 IP Phone
Campo
Descrição
Via TFTP
IP address of the configured TFTP server. When it is
Server
selected, if the value is not zero or not blank, the ET325
will attempt to retrieve a new configuration file or a new
code image from the specified TFTP server at the boot
time. With three attempts before timeout, it will start the
boot process with the existed code image in the FLASH
memory. If a TFTP server is configured and a new code
image is retrieved, the new downloaded image will be
verified and then saved into the FLASH memory.
NOTE
When adopting the TFTP upgrade software, you are
strongly recommended to upgrade the firmware in the
local LAN environment. Do not interrupt the TFTP
upgrade process (especially the power supply) to
prevent the device from being damaged.
Via HTTP
URL of the HTTP server used for firmware upgrade and
Server
configuration through HTTP, for example,
um.huawei.com/etphone.
NOTE
If Auto Upgrade is set to No, the ET325 will perform
only the HTTP downloading when it boots up.
Firmware
Configure the IP address or domain name of the
Server Path
Firmware upgrade/degrade server.
Config Server
Configure the IP address or domain name of the Config
Path
upgrade/degrade server.
Firmware File
The default value is null. If it is configured, the phone will
Prefix/postfix
request the firmware file with the prefix/postfix. This
setting is useful for ITSPs. The end user should keep it
blank.
Config File
The default value is null. The end user should keep it
Prefix/postfix
blank.
4 Guia de Configuração
41
Advertisement
