Table of Contents
Advertisement
3. Set up the WLAN connection.
–
Perform the following points in menu "Network settings / WIFI settings":
Scan and select the network.
■
Set up a network password with WLAN.
■
Change to the "Smart Access Point".
4. Add the extension unit manually to the project in the "Smart Access Point".
–
By saving in step two of adding, the extension unit receives a certificate from the "Smart
Access Point".
Fig. 137: Indoor station: Certificate
–
Check on the additional indoor station (extension unit) whether it has received the
certificate.
System Manual
Case studies
│153
Advertisement
Table of Contents
