Remaining System Installation - Motorola M68EM05A24 User Manual

2.3

REMAINING SYSTEM INSTALLATION.

HC05A24EM USER'S MANUAL
When you have configured headers P4, P5, P6 and P9, you are through
with A24EM configuration:
• To install the A24EM in an MMDS05 station module, remove the
panel from the station-module top. Fit together EM connectors P2
and P3 (on the bottom of the board) and control-board connectors
P11 and P12. Snap the mounting holes of the EM onto the plastic
standoffs. Connect the target cable, if appropriate. Replace the
panel.
• If your A24EM already is installed in the station module, reconnect
the target cable, (if necessary). Replace the panel.
At this point, you are ready to make remaining cable connections, as
necessary, and restore power. For instructions, consult the MMDS05
operations manual (MMDS05OM/D).
2
MOTOROLA
2-5